Machine construction: made from
stainless steel in modular construction, extreme stability,
unique quick access to the machine.
The Future-Pack 2000 is constructed
of modular stainless steel plates. The four basic modules
of the standard machine can be enlarged at the feeding
and discharge area.
Up to 6 metre machine length, the
frame can be manufactured out of 1 section only and
is therefore one of the most stable machines in the
market.
As an option the Future-Pack 2000
can be designed with a kneefree infeed zone. The solid
machine construction guarantees here full stability.
Forming, sealing and cutting dies
can be individually placed corresponding to mthe customer
needs.
The high quality, stainless steelmachine
frame guarantees both not only highest stability, but
also best functionality.
The straight stainless steel plates
can be taken off quickly, making the machine very easy
to service and to clean.
|
|
Hygene: corresponding to the
latest EU-Hygene guidelines.
All supply wires are installed in
the top of the machine frame. Therefore they are absolutely
water-proof and protected against dirt.
All electronic parts are designed
in accordance with IP 65.High tech modular stainless
steel construction leaves no projecting edges, gaps,
slits or open drillings. This means that bacteria dn
germs will not find a breeding ground.
As the side panels of the machine
can be taken off quickly, the inside of the machine
is quickly and easily cleaned.
The EU-hygene guidelines can easily
be met thanks to the stainless steel construction and
the use of acid-resistant and maintenance-free prefabricated
parts.
|
